Packaged ‘mains ready’ power amplifiers with step/direction command

The WSE 04.230 AC V01 and WSE 06.230 AC V01 amplifiers from Stogra have the maximum power in the smallest housing. They are packaged in a compact metal housing for mounting in control cabinets, as a DIN rail mounted unit or panel mounted. These amazing bi-polar 2-phase stepper motor controls are ready for connection directly to the mains 230VAC/50Hz

Incorporating the very latest FET-technologies in the power amplifier, there are extremely low power dissipation problems and therefore no forced cooling is necessary. Being connected direct to on line means an isolated transformer is not required, making this a most cost-effective system.Power Amplifier

Due to the new internal winding design suitable for 325VDC operation the optimal performance is achieved with the STÖGRA motor series SM 87, SM 88 and SM 107. This results in the motor power at 2A and 325VDC being comparable with 8A/80VDC of a standard DC-supplied motor/amplifier system. Then at 4A/325VDC it compares to 12A/110VDC and at 6A/325VDC compares to 12A/160 VDC of a standard system.

Motor resolutions are selectable from 200 to 12,800 steps/revolution via a DIPswitch. The phase current for the WSE 04.230 VO1 is adjustable via another DIPswitch from 0 to 4A/phase and the WSE 06.230AC V01 version from 0 to 6A/phase.

Connections are easy via screw terminals fitted to the front panel. The amplifiers include electronic protection against motor and power amplifier short circuits, power amplifier over temperature and under voltage. The output ‘ready’ signal is set via a relay and all input signals (pulse, direction, reset, boost, disable, switch step angle) are optionally opto-coupled isolated.

Because of the internal motor voltage of 325VDC all stepper motors operated with WSE xx.230AC V01 power amplifiers must have sufficient insulation strength (motor winding insulation test voltage 2000VAC for 1sec, according to VDE0530-1). The STÖGRA stepper motor series SM 87, SM 88 and SM 107 have the suitable insulation strength.

Micromech is Stogra’s UK distributor for stepper motors, drives and controls products. If you want to know more about these robust and reliable products then contact Alan Spinks on 01376 333333 or email alan@micromech.co.uk

Advertisements

One Response to Packaged ‘mains ready’ power amplifiers with step/direction command

  1. Pingback: Packaged ‘mains ready’ power amplifiers with step/direction command | Converting Guide

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: